DeWalt 266P2 18v XR Brushless Combi & Impact 2x5.0ah Batts (Free 5m Tape & Wood Brad Drill Set)
Ref no. 24595339
Mouse over image to zoom
The DEWALT 18 Volt DCK266P2 XR Brushless Twin Pack, contains the following:
1 x 18 Volt DCD796 XR Brushless Hammer Drill Driver has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screw driving.
Chuck: 13mm Keyless.
No Load Speed: 0-550/0-2,000/min.
Impact Rate: 0-9,350/3,4000/bpm
Torque: 27/70Nm, 15 Settings.
Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm
1 x 18 Volt DCF887 XR Brushless Impact Driver is Equipped with application control, this is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.
No Load Speed: 0-850/0-2,100/0-3,000/min.
Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.
1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries.
Also supplied with 2 x 18 Volt 5.0Ah Li-Ion Batteries and 1 x TOUGHSYSTEM™ DS150 Toolbox.
Choose the required size:
The delivery timescale for each item is shown on the product page. Stock items are available within 2 working days, other non stocked items delivery timescales do vary. But we have shown the “worst” case, so in most cases we will aim to deliver it sooner.
If you do have a specific day you would like your products delivered, then please ensure you put this in the comments box upon checking out.
We offer free delivery to a wide range of local postcodesLearn More »
Returns and Refunds Policy
In the unlikely event that a delivered product is faulty or damaged, we will exchange it or provide you with a full refund, as long as we are notified of the product’s fault within 14 days of it being delivered to you.Champion Timber shall not accept on return for credit any goods ordered from Champion Timber incorrectly or subsequently found to be surplus to the customer’s requirements. The suitability of specialist goods is assumed to have been assessed by the customer or his/her advisor(s) prior to purchase. Champion Timber shall endeavour to assist customers where possible by accepting at a reasonable restocking charge the return of goods (together with the original packing if applicable) which are from Champion Timber normal stock lines but goods ordered from the manufacturer cannot be accepted without Champion Timber prior agreement for the return and Champion Timber restocking charges having been paid. In any event credit cannot be given unless the customer provides Champion Timber with the number of the invoice on which the goods were supplied. Learn More »