DeWalt 2062M2T 18V Brushless Combi & Impact (2 x 4Ah Li-ion Batts)

Product Code
For Collection availability click “Buy & Collect”
£239.99 £199.99
/ Each
The Dewalt DCK2062M2T is a 2 Piece Cordless 18V Kit which contains the DCD709 Combi Drill and DCF809 Impact Driver. Both models feature a fully brushless motor, which provides maximum power, increased run time and long service life. These compact tools are ideal for use in tight, hard to reach areas as well as overhead. Also included are 2 x 4.0Ah Batteries, DCB115 and a TSTAK Carry Case.1 x 18V DCD709 XR Brushless Combi Hammer Drill has an overall head length of just 180mm, allowing you to get into the smallest of spaces. Fitted with an ergonomically designed handle for optimum comfort and control.

DCD709N Brushless Combi Drill:
Only 175mm in length, allowing you to get in to even smaller spaces
Only 1.2Kg (tool only) for ultimate portability and ease of use
Efficient brushless motor delivers high performance, extends tool life and allows for a much shorter design
LED with delay feature for better workpiece illumination
15 position adjustable torque control for consistent screw driving into a variety of materials
65Nm torque allows you to achieve tough applications
Includes belt clip
Power Output (W): 340
Soft Application Max Torque (Nm): 26
Hard Application Max Torque (Nm): 65
Brake Type: Electric
No. of Gears: 2
Rotation: Forward / Reverse
No Load Speed (RPM) High: 0-1650
No Load Speed (RPM) Med: N/A
No Load Speed (RPM) Low: 0-450
Chuck Capacity (mm): 1.5-13.0
Drill Capacity: Concrete (mm): 13
Drill Capacity: Metal (mm): 13
Drill Capacity: Wood (mm): 30
Impact Rate (BPM) High: 0-28050
Impact Rate (BPM) Med: 0-N/A
Impact Rate (BPM) Low: 0-7650
Brushless Motor: Yes

DCF809N Brushless Impact Driver:
Only 131mm in length, allowing you to get into even smaller spaces
Only 1.0kg (tool only) for ultimate portability
Up to 190Nm torque allows you to achieve tough applications
Efficient brushless motor delivers high performance, extends tool life and allows for a much shorter design
'Drop and Load' bit holder for one-handed operation
Includes belt clip
Max Torque (Nm): 190
Rotation: Forward / Reverse
Variable Speed Control Trigger: Yes
No Load Speed (RPM): 0-2800
Standard Bolt Capacity: M4-M12
Max. Impacts Per Min (IPM): 0-3200
Driving Shank: 1/4" Hex
Overall Length (mm): 130
Brushless Motor: Yes

This kit Includes:
1x DCD709 Brushless Combi Drill
1x DCD709 Belt Hook
1x DCF809 Brushless Impact Driver
1x DCF809 Belt Hook
2x DCB182 4.0Ah XR Li-Ion Batteries
1x DCB115 Multi Voltage Charger
1x TSTAK II Kit Box with Inlay
More Information
Operation Type Battery
Type Combi Drill and Impact Driver
Brand DeWalt
Write Your Own Review
You're reviewing:DeWalt 2062M2T 18V Brushless Combi & Impact (2 x 4Ah Li-ion Batts)
Your Rating

We deliver local and nationwide any day except Saturdays, Sundays and Bank Holidays.

We will contact you via text the evening before with a 90 minute timeslot for your delivery, so you can plan your day.

If your order is within our designated area, then we will deliver it for FREE subject to the order value exceeding £40 ex VAT

Click here for our delivery areas and charges.

Check for Free Delivery

Returns and Refunds Policy

In the unlikely event that a delivered product is faulty or damaged, we will exchange it or provide you with a full refund, as long as we are notified of the product’s fault within 48 hours of it being delivered to you.

Champion Timber shall not accept on return for credit any goods ordered from Champion Timber incorrectly or subsequently found to be surplus to the customer’s requirements. The suitability of specialist goods is assumed to have been assessed by the customer or his/her advisor(s) prior to purchase. Champion Timber shall endeavour to assist customers where possible by accepting at a reasonable restocking charge the return of goods (together with the original packing if applicable) which are from Champion Timber normal stock lines but goods ordered from the manufacturer cannot be accepted without Champion Timber prior agreement for the return and Champion Timber restocking charges having been paid. In any event, credit cannot be given unless the customer provides Champion Timber with the number of the invoice on which the goods were supplied.

View our full Returns and Refunds Policy.