Makita HR3210C SDS+ AVT Rotary Hammer Drill 850 Watt with three drilling modes of operation: hammer drill, rotary drill and hammer only. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling.
Soft start operation to ensure a smooth and even start every time, and the torque limiter stops the drill when the bit hits against reinforcements. It also has a built in job light.
It features the unique Makita AVT Anti Vibration Technology design employing the pneumatic pressure created in the drill's hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration.
It is supplied with a side handle, depth stop, bit grease and a carry case.
Input Power: 850 Watt.
No Load Speed: 315-630/min.
Impact Rate: 1,650-3,300/bpm.
Impact Energy: 5.0 Joules.
Capacity: Concrete: 32mm, Core Diameter (TCT): 90mm.