DeWalt DCK266P2T18V XR Brushless Combi + Impact Driver (2 x 5.0Ah Batteries)

REF: 24595339

For Collection availability click "Buy & Collect".

Quantity

£239.99 Ex VAT / each £287.99 Inc VAT / each

Can't find what you're looking for? Call us

More Information

Delivery

Returns

More Information

Product Information

18V DCD796 XR Brushless Combi Drill has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. 15 position adjustable torque control for consistent screw driving.
Chuck: 13mm Keyless.
No Load Speed: 0-550/0-2,000/min.
Impact Rate: 0-9,350/3,4000/bpm
Torque: 27/70Nm, 15 Settings.
Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm
18V DCF887 XR Brushless Impact Driver is Equipped with application control, this is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. Super lightweight and compact design.
No Load Speed: 0-850/0-2,100/0-3,000/min.
Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.
Torque: 26/80/203Nm.
10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life.
With 2 off 18V 5.0Ah Li-Ion Batteries, 1 TOUGHSYSTEM™ DS150 Toolbox

Delivery

We deliver nationwide any day except Sundays and Bank Holidays.

If your order is within our designated area, then we will deliver it for FREE subject to the order value exceeding £75 ex VAT

For our delivery areas and charges, if applicable, please click here.

Check for free delivery

Returns

Returns and Refunds Policy

In the unlikely event that a delivered product is faulty or damaged, we will exchange it or provide you with a full refund, as long as we are notified of the product’s fault within 48 hours of it being delivered to you.

Champion Timber shall not accept on return for credit any goods ordered from Champion Timber incorrectly or subsequently found to be surplus to the customer’s requirements. The suitability of specialist goods is assumed to have been assessed by the customer or his/her advisor(s) prior to purchase. Champion Timber shall endeavour to assist customers where possible by accepting at a reasonable restocking charge the return of goods (together with the original packing if applicable) which are from Champion Timber normal stock lines but goods ordered from the manufacturer cannot be accepted without Champion Timber prior agreement for the return and Champion Timber restocking charges having been paid. In any event credit cannot be given unless the customer provides Champion Timber with the number of the invoice on which the goods were supplied.

Click here to find out more.