DeWalt DCH273P2 18V SDS+ 3-Mode Drill (2 x 5.0Ah Li-ion Batteries)

Product Code
24577731
For Collection availability click “Buy & Collect”
£419.99 £349.99
/ Each
The DeWalt DCH273P2 Brushless XR SDS Hammer has a category-leading high-speed drilling performance at more than 90 holes (10 x 80mm) per charge. With a rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal. The brushless motor and high capacity XR 18 Volt 5.0Ah Lithium-Ion battery platform provide extreme runtime and reduced maintenance.

It is fitted with an electronic clutch for consistently high torque and improved durability and is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4 to 24mm. Its compact, lightweight and ergonomic design provide improved comfort and support during extended operating periods. It also has a bright white LED with a delay feature for improved visibility.

Specification:
No Load Speed: 0-1,100/min
Impact Rate: 0-4,600/bpm with 2.1 Joules
Capacity: Wood: 26mm, Metal: 13mm, Masonry: 24mm
Tool Holder: SDS-Plus
Length: 301mm
Weight: 3.1kg
Hand/Arm Vibration: Drilling 6.6m/s², Chiselling: 5.4m/s², Metal: 2.5m/s²,
Uncertainty: K1/K2/K3 (Vibration): 1.5m/s²
Sound Pressure: 86 dB(A).
Sound Pressure Uncertainty: 3 dB(A)
Sound Power: 97 dB(A).
Sound Power Uncertainty: 3 dB(A)

Supplied with:
2 x 18V 5.0Ah Li-Ion Batteries
1 x Multi-Voltage XR Li-Ion Charger
1 x Belt Hook
1 x Multi-Position Side Handle
1 x Heavy-Duty Kitbox
More Information
Operation TypeBattery
TypeSDS + Hammer Drill
BrandDeWalt
Reviews

We deliver local and nationwide any day except Saturdays, Sundays and Bank Holidays.

We will contact you via text the evening before with a 90-minute timeslot for your delivery, so you can plan your day.

If your order is within our designated area, then we will deliver it for FREE NEXT DAY (subject to availability and minimum order value).

Click here for our delivery areas and charges.

Check for Free Delivery

Returns and Refunds Policy

In the unlikely event that a delivered product is faulty or damaged, we will exchange it or provide you with a full refund, as long as we are notified of the product’s fault within 48 hours of it being delivered to you.


Champion Timber shall not accept on return for credit any goods ordered from Champion Timber incorrectly or subsequently found to be surplus to the customer’s requirements. The suitability of specialist goods is assumed to have been assessed by the customer or his/her advisor(s) prior to purchase. Champion Timber shall endeavour to assist customers where possible by accepting at a reasonable restocking charge the return of goods (together with the original packing if applicable) which are from Champion Timber normal stock lines but goods ordered from the manufacturer cannot be accepted without Champion Timber prior agreement for the return and Champion Timber restocking charges having been paid. In any event, credit cannot be given unless the customer provides Champion Timber with the number of the invoice on which the goods were supplied.

View our full Returns and Refunds Policy.