Quick setting one part polyurethane foam in aerosol form supplied with attachable nozzles. The foam expands on application to up to 50 times its original volume and expands on application by 150%. Once cured, the foam can be cut, sawn or plastered over after only an hour providing the working temperatures (can and surfaces) are between +5 to +25° C, ideally 20° C.
Quick setting - can be cut, sawn or plastered in 1 hour
Fills irregular and broad gaps where most conventional fillers would fail
Possesses insulating and sound deadening properties.
Ideal for filling
gaps around pipe entries through walls
gaps around window and door frames
electrical wire chasing prior to plastering
deep joints prior to applying sealant or plaster
irregular gaps in stone, brick, concrete or plaster
window sills and thresholds
behind cladding to exterior walls
behind sofit and barge boards
in automotive applications