Jackson Vertical Hit & Miss Panel

Our 910 x 1830mm Hit and Miss fencing panels are so called because the pales or boards are alternately fixed on the front and the back of the panel with an over-lap to create a stylish Hit and Miss pattern, and both sides will look the same.

Features:
All timber used throughout is superior quality Jakcure® treated softwood guaranteed for 25 years
Designed for use with slotted Jakposts
Stainless steel fixings are used throughout for longer life
High quality planed finish
Morticed and tenoned frame for extra strength
Each board runs vertically
Distinctive design which looks good from both sides of the panel
Slatted panel design has an approx. 15% wind load reduction as the gaps between the pales allows air to pass through.

Sizing:
Panels are 0.91m wide, framing 45 x 50mm, recessed to take boards.
Vertical boards 95 x 8mm with horizontal internal battens 50 x 12mm.
Panel Thickness: 51mm

Notes:
To meet the conditions of the 25 year guarantee, gravel boards are required when in contact with the ground, and any timber cut on site must be treated with Jakcure® Cut Treatment.
These Vertical Hit & Miss fencing panels do not provide total privacy.